Pottery Garden Set Winner

Thanks for all your comments on our blog and on Facebook. Becky Rickrode is our peg stamp random drawing winner. She will receive a Pottery Peg Stamp set. Congratulations Becky.

Rubber Stamp Tapestry Blue Eden

Supplies needed:

1 Card Base of white cardstock

1 Rubber Stamp Tapestry Blue Eden Peg Stamp Set

1 Rubber Stamp Tapestry Thinking of You Sentiment Stamp

1” circle die or punch

Sponge dauber

Scotch Permanent Mounting Tape.

Six (6) faux pearl embellishments

The following Memento inks:

□   Summer Sky(ME or MD604)

□   Bahama Blue (ME or 601)□   London Fog (ME or MD901)

□   Danube Blue (ME or MD600)

□   Bamboo Leaves (ME or MD707)

□   Tuxedo Black (ME or MD900)

NOTE: ME is the prefix for Memento full-sized ink pads while MD designates the dewdrop pads.

CARDSTOCK BASE:

I created the card base by cutting an 8 ½” x 11” piece of white cardstock I purchased at Sam’s Club. I cut the cardstock in half for an 8 ½” x 5 ½” card, scored a line at the 4 ¼” position and folded it in half. That gives us an A2 card measuring 4 ¼” x 5 ½” folded.

Cut a piece of blue cardstock measuring 3 ¾” x 4 ½” (we used The Paper Cut’s Lunar Blue).

Cut a piece of white cardstock measuring 3 ½” x 4 ¼”.

Die cut or punch three 1” circles in Lunar Blue and in White.

Edge cardstock base, white cardstock and white circles with Memento Bahama Blue

CREATING THE DESIGN:

To create the design, use the following guidelines for creating your image.

1.       Load your Wild Rose Flower image with Memento’s Summer Sky ink. The randomly stamp image on both the card base front and the piece of what storage box. Repeat stamping Wild Rose Flower with Bahama Blue and London Flog.

2.       Load Sawtooth Leaf with Memento Bamboo Leaf Ink and then randomly stamp image on both the card base and white cardstock.

3.       Load Ladder Leaf with Memento Bamboo Leaf Ink and then randomly stamp image on both card base and white cardstock.

4.       Load Starburst Flower with Memento Danube Blue Ink and then randomly stamp image on both card base and white cardstock.

5.       Load Tuxedo Black “thinking of YOU” sentiment on one circle die cut.

6.       Glue white cardstock onto blue cardstock. Glue two blue cardstock circles onto two blue cardstock circles.  Glue white sentiment cardstock circle onto blue die cut circle.

7.       Place Scotch Permanent Mounting Tape on back of circles and align on adhere them to the upper quadrant of the card front.

8.       Place Scotch Permanent Mounting Tape on back of Lunar Blue rectangle and center on card base.

9.       Place three faux pearls on the upper left hand corner of the card base and three faux pearls on the right hand corner of the card front pop out.

RST Springtime Bunny Card

By Diane Cook

Be sure to make a comment to be eligible for a peg stamp drawing on March 16.

Supplies needed:

1 Card Base of white cardstock

1 Rubber Stamp Tapestry Springtime Bunny Peg Stamp Set

3 ½” x 2 ¼” Oval die or punch

Cloud die or punch

Memento Ink’s Espresso Truffle (ME or MD808)

Bamboo Leaves (ME or MD707)

Tombow Colored Pencils:

LG2 Cork

LG4 Wax Yellow

LG7 Quartz Green

NOTE: ME is the prefix for Memento full-sized ink pads while MD designates the dewdrop pads.

CARDSTOCK BASE:

I created the card base by cutting an 8 ½” x 11” piece of white cardstock I purchased at Sam’s Club. I cut the cardstock in half for an 8 ½” x 5 ½” card, scored a line at the 4 ¼” position and folded it in half. That gives us an A2 card measuring 4 ¼” x 5 ½” folded. Cut an oval in your card base with your die or punch.

CREATING THE DESIGN:

To create the design, use the following guidelines for creating your image.

1.       Stamp your rabbit with Espresso Truffle on the inside of the oval.

2.       Stamp flowers on the outside and inside of your card

3.       Stamp grass using Memento Bamboo Leaves on the outside and inside of card.

4.       Die cut or punch out clouds and glue them to the outside of the card.

5.       Color the Rabbit with a light brown colored pencil. I used LG2 Cork. I used colored pencil so the texture of the art work would show through the colors.

6.       Color the daffodils with a yellow colored pencil. I used LG4 Wax Yellow.

7.       Color the leaves with a green colored pencil. I used LG7 Quartz Green

Your card is finished and now you’re ready to mail or give it to that special someone in your life. Thank you for crafting with us.

Rubber Stamp Tapestry Catnip Garden

Don't forget to add a comment to be eligible for our March 16 drawing. Prize is a Pottery Garden Stamp Set.

Supplies needed:

1 Card Base of Green cardstock

1-White cardstock

1 Orange cardstock

1 Rubber Stamp Tapestry Pottery Garden Peg Stamp Set

1 Rubber Stamp Tapestry Catnip Garden SAN02009

The following Memento inks:

□   Cottage Ivy (ME or MD701)

□   Pear Tart (ME or MD703)

□   Danube Blue (ME or MD600)

□   Tangelo (ME or MD200)

□   Cantaloupe (ME or MD103)

□   Rich Cocoa (ME or MD800)

NOTE: ME is the prefix for Memento full-sized ink pads while MD designates the dewdrop pads.

CARDSTOCK BASE:

I created the card base by cutting an 8 ½” x 11” piece of green cardstock. I cut the cardstock in half for an 8 ½” x 5 ½” card, scored a line at the 4 ¼” position and folded it in half. That gives us an A2 card measuring 4 ¼” x 5 ½” folded. I also made the following cuts:

White Cardstock – 1 piece 2 ¾” x 5” and 1 piece at 2 1/8” x 2 1/8”.

Green Cardstock – 1 piece 2 ¾” x 2 ¾”

Orange Cardstock – 1 piece 3 ¾” x 2 ¾”

CREATING THE DESIGN:

To create the design, use the following guidelines for creating your image.

1.       On the two white cardstock pieces, I stamped the leaf with Cottage Ivy and another leaf with Pear Tart  (see photo for stamping guide).

2.       On the two white cardstock pieces, I stamped the flowers with Danube Blue, Tangelo and Cantalope.

3.       I stamped the cat in the center of the small square with Rich Cocoa.

4.       I edged the white cardstock pieces with Cottage Ivy and added a second layer of Rich Cocoa.

5.       I edged the orange and green squares with Rich Cocoa.

6.       Assemble the card as shown in the picture. I used foam dots beneath the green square.

Your card is finished and now you’re ready to mail or give it to that special someone in your life. Thank you for crafting with us.

Rubber Stamp Tapestry Seahorse Garden Stamp Set

I absolutely love the Seahorse Garden Peg Stamp Set SAQ00006. I created the card base by cutting and 8 ½” x 11” piece of the The Paper Cut’s Lunar Blue Cardstock in half for an 8 ½” x 5 ½” card. I then scored a line at the 4 ¼” position and fold the card in half. That gives us an A2 card measuring 4 ¼” x  5 ½” card front..

I used the following Memento inks on this project: Large n Seahorse – Danube Blue #600; Tiny Seahorse -- #200; Starfish – Solid Tart #703; Anemone Flower – Lulu Lavender #504; and the Kelp closes out the place – Teal Zeal – #602.

To finish out the nautical theme, I used elements from Elizabeth Craft’s Shells Large set #1146. I cut out the dies using Elizabeth Craft’s White Soft Finish Card Stock, 85-pound weight. I colored the die cuts with Pan Pastels using 340.5 Permanent Red on the crab and 925.5 Pearlescent Orange on the shells.

RST Pottery Garden card

Welcome to our March Peg Stamp contest. We will be posting at least 10 peg stamp cards between now and March 15. If you comment on any of the these cards, you will be eligible to win  a Rubber Stamp Tapestry Pottery Garden peg stamp set valued at $15.20. The winner will be announced on March 16 here and on our Scrappigators page on Facebook. When you see your name, send me your email and delivery address at diane@scrappigators.com so we can make arrangements to send you your peg stamp set.

Supplies needed:

1 Card Base of white cardstock

1 Rubber Stamp Tapestry Pottery Garden Peg Stamp Set

1 Rubber Stamp Tapestry Thinking of You Sentiment Stamp

1 ½” x ¾” Oval die or punch

The following Memento inks:

□   Potter’s Clay (ME or MD801)

□   Northern Pine (ME or MD709)

□   Rhubarb Stalk (ME or MD301)

□   Teal Zeal (ME or MD602)

□   Cantaloupe (ME or MD103)

□   Bamboo Leaves (ME or MD707)

NOTE: ME is the prefix for Memento full-sized ink pads while MD designates the dewdrop pads.

This is my second Rubber Stamp Tapestry card sample, and I am totally excited about sharing it with you.

 CARD BASE:

I created the card base by cutting an 8 ½” x 11” piece of white cardstock I purchased at Sam’s Club. I cut the cardstock in half for an 8 ½” x 5 ½” card, scored a line at the 4 ¼” position and folded it in half. That gives us an A2 card measuring 4 ¼” x 5 ½” folded.

CREATING THE DESIGN:

Cut your Oval Die and stamp the sentiment on it using Rhubarb Stalk (ME or MD301). Using a sponge dauber, edge the oval with Rhubarb Stalk and set aside.

To create the design, use the following guidelines for creating your image.

1.       Stamp the Pottery image with Potter’s Clay (ME or MD801) on the lower third of the page. Clean your stamp and return it to your storage box

2.       Stamp one evergreen branch with Northern Pine (MD or ME709) on each side of the five individual pots for a total of 10 branches. Clean your stamp with non-alcoholic baby wipe, stamp cleaner or water.

3.       Stamp two each of the Solid Eight Petals with Teal Zeal MD or ME 602) slightly above each of the five pots. Clean your stamp.

4.       Stamp two each of the Solid Eight Petals with Cantaloupe (MD or ME103) slightly above each of the five pots. Clean your stamp

5.       Stamp two each of the Pinwheel Flower with Rhubarb Stalk (MD or ME301) over each of the five pots. Clean your stamp.

6.       Stamp Accent Leaf with Bamboo Leaves (MD or ME707) randomly above each of the five pots. Clean your stamp.

7.       Stamp Evergreen branches with Northern Pine (MD or ME709) around the perimeter of the card front. Clean your stamp.

8.       Stamp Solid Eight Petals with Teal Zeal MD or ME 602 coming off of the Evergreens you stamped around the card perimeter. Clean your stamp.

9.       Stamp Solid Eight Petals with Cantaloupe (MD or ME103) coming off the Evergreens you stamped around the card perimeter. Clean your stamp and return to stamp storage.

10.   Stamp Pinwheel Flower with Rhubarb Stalk (MD or ME301) coming off of each Evergreen Leaf around the perimeter. Clean your stamp and return to stamp storage.

11.   Stamp Accent Leaf with Bamboo Leaves (ME or MD707) coming off of each floral arrangement around Perimeter. Clean your stamp and return to stamp storage.

12.   Place your oval die cut in the upper third of the page and lightly mark its position with pencil on each side of oval.

13.   Stamp two Evergreen Leaves with Northern Pine (ME or MD709) on each side of the two dots. Clean your stamp and return it to stamp storage box.

14.   Apply foam dot to back of oval die cut and place on card.

Your card is finished and now you’re ready to mail or give it to that special someone in your life. Thank you for crafting with us.